It is inevitable that there would be things that would get overlooked if you are running your own successful business. One of the neglected fields is the inspection of the commercial plumbing systems. Expensive leaks or blowouts can happen with the failure to conduct the regular checks so that they can be carried out at least on an annual basis with the help of the Edmonton commercial plumbing companies.
The following are the 7 areas that should be inspected at all times when you are carrying out routine maintenance jobs. In the long term, you will be able to save both time and money.
1. Look for existing leaks, no matter how minor
Leaks are mainly quite small, and yet they can rapidly escalate into something that is far more serious. It would include checking out the mold, mildew, as well as moisture when it comes to the physical inspection for the leaks.
2. Check for signs of corrosion
The common sign of corrosion would be the build-up of the limescale. A physical check should be conducted, and any pipes that show distinctive signs of corrosion need to be replaced once again.
3. Check the water pressure
The pressure of water is quite high or even quite low, which is a common issue that is found when plumbing companies are carrying out routine maintenance work. There are guidelines that the pressure needs to be between 80 to 40 psi. It is often found that the pressure of water on the lower floors is quite high and too low higher up in the taller buildings. Where possible, this has to be addressed.
4. Check all valves are functioning correctly
The property can be saved from severe water damages with the help of the shut-off valves. There need to be frequent tests and if they are replaced. Valves would also mean that the supply of water can be turned off in a few specific areas of the building instead of turning off the entire supply of water.
5. Check all water heaters
There would be something else that would need physical attention. It is vital to inspect the leaks and also in terms of checking the temperatures. If there is an issue that is found, safety valves and the overflows should be tested.
6. Check drains
It is vital for the flow to get checked as faulty, or the blocked drains can be a significant health hazard. For clearing out the blockages, any clogged or slow-moving drains should be power-rodded. The use of camera surveillance is also quite useful in a few instances.
7. Check Backflow
Having the backflow prevention devices fitted is a legal requirement for every commercial building and the larger residential properties. Testing has to be carried out on an annual basis for checking for any issues that include contamination.
It is vital that you call on the services of a team of experts who will be carrying out thorough testing when it comes to preventative maintenance. Prevention is quite better than cure, and it certainly is the case when it comes to carrying out routine commercial plumbing maintenance work.
